Digital Printing Service in Singapore
Custom Bookmarks
Artwork Specifications (Custom Bookmarks)
To avoid unnecessary time delays caused by artwork with design flaws. Please take note of the specifications listed below, please also refer to Artwork Specifications (General) for additional details. If you still have any issues, kindly Contact Us Here, and we will do our best to assist you with your Artwork.
- For Bookmark Artwork Design, please choose from the following sizes:
- Bleed Size 144mm x 54mm, Actual Size 140mm x 50mm after trimming OR
- Bleed Size 144mm x 58mm, Actual Size 140mm x 54mm after trimming
(Note: Bleed Size is not always required, you may send in Actual Size without Bleed if there is no printing at the edge)
- We recommend that any important elements such as words / images, and any border frames / lines should be kept within the Safe Area (5mm away from the edge) to avoid them being cut off and to accommodate for cutting error.
- All Artwork Design needs to be above 300dpi to ensure good printing quality. Artwork Design with small text would need to be a minimum of 400dpi.
(Example A: If you are printing 140mm x 50mm Bookmarks, you need to send us the Artwork with the Bleed Size of 144mm x 54mm. The Bleed Area is 2mm, but you may Bleed up to 5mm if needed. Any important elements should be kept within the Safe Area of 130mm x 40mm, which is 5mm away from the edge.)
(Example B: If you are printing 140mm x 54mm Bookmarks, you need to send us the Artwork with the Bleed Size of 144mm x 58mm. The Bleed Area is 2mm, but you may Bleed up to 5mm if needed. Any important elements should be kept within the Safe Area of 130mm x 44mm, which is 5mm away from the edge.)
