Digital Printing Service in Singapore
Artwork Specifications for Digital Prints (A4 / A4 Folded)
To avoid unnecessary time delays caused by artwork with design flaws. Please take note of the specifications listed below, please also refer to Artwork Specifications (General) for additional details. If you still have any issues, kindly Contact Us Here, and we will do our best to assist you with your Artwork.
- For A4 Artwork Design, please use the following size:
Bleed Size 301mm x 214mm, Actual Size 297mm x 210mm after trimming
(Note: Bleed Size is not always required, you may send in Actual Size without Bleed if there is no printing at the edge) - We recommend that any important elements such as words / images, and any border frames / lines should be kept within the Safe Area (5mm away from the edge) to avoid them being cut off and to accommodate for cutting error.
- All Artwork Design needs to be above 300dpi to ensure good printing quality. Artwork Design with small text would need to be a minimum of 400dpi.
(Example: If you are printing A4, you need to send us an Artwork with the Bleed Size of 301mm x 214mm. The Bleed Area is 2mm, but you may Bleed up to 5mm if needed. Any important elements should be kept within the Safe Area of 287mm x 200mm, which is 5mm away from the edge)
- For A4 Half-Fold Artwork Design, please use the following size:
Opened Bleed Size 301mm x 214mm, Opened Actual Size 297mm x 210mm after trimming
(Note: Bleed Size is not always required, you may send in Actual Size without Bleed if there is no printing at the edge) - We recommend that any important elements such as words / images, and any border frames / lines should be kept within the Safe Area (5mm away from the edge) to avoid them being cut off and to accommodate for cutting error.
- All Artwork Design needs to be above 300dpi to ensure good printing quality. Artwork Design with small text would need to be a minimum of 400dpi.
(Example: If you are printing A4 Half-Fold, you need to send us an Artwork with the Opened Bleed Size of 301mm x 214mm. The Bleed Area is 2mm, but you may Bleed up to 5mm if needed. Any important elements should be kept within the Safe Area of 138.5mm x 200mm, which is 5mm away from the edge of each Page)
(Tip: You can fold a piece of paper in half, and write the filename on each page, then open it up and take a photo of it on both sides and email us, like the picture below)
- For A4 Tri-Fold or Z-Fold Artwork Design, please use the following size:
Opened Bleed Size 301mm x 214mm, Opened Actual Size 297mm x 210mm after trimming
(Note: Bleed Size is not always required, you may send in Actual Size without Bleed if there is no printing at the edge) - We recommend that any important elements such as words / images, and any border frames / lines should be kept within the Safe Area (5mm away from the edge) to avoid them being cut off and to accommodate for cutting error.
- All Artwork Design needs to be above 300dpi to ensure good printing quality. Artwork Design with small text would need to be a minimum of 400dpi.
(Example: If you are printing A4 Tri-Fold or Z-Fold, you need to send us an Artwork with the Opened Bleed Size of 301mm x 214mm. The Bleed Area is 2mm, but you may Bleed up to 5mm if needed. Any important elements should be kept within the Safe Area of 138.5mm x 200mm, which is 5mm away from the edge of each Page)
A4 Tri-Fold
A4 Z-Fold
(Tip: You can fold a piece of paper in 3 parts, write the filename on each page, then open it up and take a photo of it on both sides and email us, like the picture below)